Best Format for Six Sigma Final Report

I am also preparing the final report so I would too be interested in hearing from the experts on what the best approach is.

I am no expert, but have written 5 final reports (we call them control plans), this is what I do.

Front page is a sign off sheet for the project. Includes the names of all the team members, sponsor, champion/MBB, local finance & corporate finance.

Then is a short introduction, stating the problems and reason for the project and the goals of the project.

Then a description of the key 6s tools used and where used (definatley not too technical)

Next is the control plan i.e. how to monitor & measure the performance after you hand it back and what to do if the process is going out of control. Remember the sustain part of this is the most important.

Finally a financial summary and projected ROI/EVA for the project.

Also I usually stick in a couple of key charts as appendix. C&E metrix, I&MR charts showing performance before and after improvement phase.

In total the document is only 6 pages excluding appendix. Hope this helps / what you are looking for. I was in the same possition as you once and just had to do something, so far no one has complained.

Regards, David.

The DOLLAR TEST

Hold a dollar at your shoulder, start your presentation and release the dollar. 

If the VP is not interested by the time the dollar hits the ground, you fail. 

Its all about the money. 

I feel thats all they want to see so that's all we need to spend our time showing them.  If they have questions on how the money was made or saved, go to slide two and begin the explanation.

I use a Power Point format and send the report out to our Upper Management Staff on a monthly basis. In this report (called "Six Sigma Metrics Report") I identify in the beginning the project and objectives, then I follow that with the team members and "Metric Owners" who contributed to the success of the project. After that I put in a few of the CTQ metrics and their current performance against baseline performance (basically I show a rolling time period to demonstrate continuous improvement). At the end of the report I include the Control Plan for the project along with the Project Financial Report (I put this at the end so that I know the management staff will have to look through the CTQ's before they get to the bottom line $$). I have had good response from the staff on this communication method.

Good Luck,

Brad M.

Keeping the audience in mind (a Vice President with or without knowledge of Six Sigma methodology details), I would start with the DMAIC process/briefing you use to "certify" as a green/black belt and synthethize it to meet the audience's needs. I would start out with a context setting moment for the VP if he needs it and then launch into the report/presentation.  I would report in a "veni, vidi, vici" format ("I came, I saw, I conquered") making sure the VP got the message on the ROI and how you are now armed with tools to conquer other company process problems.

Just   my 2 cents worth.

Bob H.

I have finished my first project. For my project, I writted the turnover package for process owner as final report. It should cover:

Contents

1.	Project recognition
2.	Project charter
3.	Executive summary
4.	Project details
5.	6 Sigma project deliverables by phase
6.	Main tracking
7.	Lessons learned
8.	Supporting data

How about this? 1)The Current State Metric, 2) the future state metric, 3)Productivity Improvements metric achieved/foreseen (Cost reduction, cycle time improvement, inventory reduction, quality/reliability improvement, customer satisfaction, new design feature), 4) Pareto (options investigated) 5)Fishbone (Top 1 or 2 topics investigated from Pareto), 6)Schedule/Implementation Done 7)Metrics for Sustainment Efforts

Good Luck 6S Champion

Dear Brad

Thanks for the best format.

Can you kindly email me a sample report please ?

Niloy Mitter

Would it be possible for me to get a copy of the report with the company name removed? I do not want confidential data, but I would love to see what it looks like.

Thank you for your time and assistance

Rj

Good Monday morning to everyone!

Hello folks,

Its report time!  I searched the iSixSigma site for past postings regarding project reports, only one posting about a year ago.  Some good ideas were found.  Does anyone have any good thoughts or formats that worked well for them to add that I can (steal)...I mean borrow?

Has an uniform accepted format been developed for 6S?  Seems something as powerful as 6S that uses the same tools across the boards would be reported out the same way so anyone would understand what was done.

Jeepers..I'm begining to worry about the Red Sox after this weekend too.

Later,

Billybob

Billybob,

I've consulted for years now on Six Sigma and have yet to see the same reporting structure or reports used at different companies. Each company likes to "accomplish" things in different manners -- it speaks to the company culture. So, unfortunately, no one template fits all sizes.

I personally like the one page review sheet that includes a summary of each phase, main tools used, main findings. I can then ask BBs the significance of the tools/findings, etc. Usually the BB will need a few pages per phase as backup information during the tollgate reviews.

Hope that helps,

Conrad

For us, the main purpose of a final report is to share the knowledge obtained during the development of your project and results (wether good or not good).  We have two ways of doing this: 

1.- Project posters, which are updated during the project development period and posted in different locations where many people can see them to promote conversation and obtain new ideas (this also helps to generate buy-in for your solutions and new projects).  

2.- Final project report, where we ask the Blackbelts to share experiences (good and bad, barriers, new tools they discover along the way, etc.), around the whole process along with their final results in terms of impacting a business KPI or financial return.  This report is then formally handed over to the process owner who takes responsibility for sustaning and reporting the benefits, and completing implementation of longer term solutions.  The report includes at least: Team Charter, Stakeholders and their Requirements, Data Collection and Analysis,  Baseline Sigma Calculation, Root Cause Analysis, Possible Solutions Identified and Evaluated, Selected Solution/s, Pilot (when applicable), Implementation Plan (including Gantt Chart, training and communication), KPI´s and Monitoring System (including responsible persons).  We also ask them to document all their team meetings with agendas and minutes to assess their facilitation and knowledge transfer skills.

We also use this report to identify any transferrable knowledge that can be applied in other parts of the business.

Hope this helps.

Besie

Besie,

Thanks so much for your thoughts on the best format for a six sigma final report - they helped me tremendously!

Reynold

You are doing two things 1) Reporting your success ,2) Selling the six sigma methodology.  Both are important

Typical presentations in sixsigma are referred to as a storyboard, this document should be a cumulative document enlarging as you go through the various stages DMAIC of a process.  The key to a successful project is a demonstration ofthe 1) Problem statement, 2) a Current state process map which details the process in question as you found it when you started. Several graphical representations of the data you measured to confirm the state of the process as you found it in the analysis phase you should have utilize some methodology for statistically determining the root causes, in improve you determinedthe best solution (s) to the root causes and pehapsa pilot project with results that confirmed you fixed it. In the control phase you should have a control plan and a listing of lessons learned and perhaps future rocommendation on other issues affecting the process.

I am surprised that when you were taught the sixsigma methodology no one mentioned the storyboard.

Oh well..

Hope this helps.

Hi Kofi,

It would be a good idea to prepare a powerpoint presentation. One stroy board for each stage - highlighting the various steps and tools and analysis drawn during the course of each stage.

Rohit Madhavan

David, I totally agree with this approach. 

I think the best way is to get to the point quickly; show the "what was" against the "new approach" and a couple of the Six Sigma tools used are good to demonstrate the value add of Six Sigma.  The key is if you are asked to do a 5 minute presentation, do just that.

Dear Friends, Plz have a look at the following page :- http://www.osat.umich.edu/sixsigma/Reference/templates.htm This page contains templates for six sigma reports and presentations. Regards Mukul

I will try make a report .. can you send me sample

I have completed Six sigma project and am able to help you. Please submit me your presentation.

Vijay

Hi,

Please help me in preparing six sigma report before starting the project. The topic has been discussed but how to go about it.

Thanks and Regards,

Sapna

Thanks.can you give best format for cycle time reduction to improve yield specially in smt technology.

There is a book by D.H.Stamatis called Six Sigma and Beyond the implementation process it could guide you through a an excellent report writing for DMAIC process

Good Luck

Dear Sir,

I have a good sample of black belt project, if you want please mail me at the following address:

ferdowsi_sh1yahoo.com

Would be very gratful to have a copy of your report.

Many thanks

Gareth

Dave,

I know this is an old discussion session, but if you are still out there can you provide a copy of one of your reports as an example?

Thanks,

I have many report samples if you wish.  Just drop me a mail

John

Dear John
Iam looking for some Six Sigma reports.
Krish
krish277hotmail.com

Dear John
Can you send some  Six Sigma reports?.
email: emiliano_domicoyahoo.com.mx

We have taken a project on Optimization of LPG Pumps of Jamnagar-Loni LPG Pipeline of GAIL(India) Limited. I do not have much knowledge on how to prepare report on this project. Please provide a sample project report so that I can proceed on this project and I can submit report to my management. I will be very thankful to all, if they extend their kind cooperation to me.

Regards.

 Hi consider i can assist you in your Report presentation (format)

The problem is i have created a PDF Template, which i could send it to you if you provide me your email address.or simply email me on a_anandhacharhotmail.com

Kind Regards

Amit

M.RAes. M.I.MechE. M.IIE. SiFu

Hi John

It would be really nice of you, if you could forward me some of your reports.

Thanks in advance for your assistance

Sachin

Cannot send you anything without your mail

John,

As per your 27th February post...

I would appreciate if you could e-mail some examples.

Thank you.

Joe

smileyjfhotmail.com

Hi John

My Email id is aca_sachinyahoo.com

Thanks a lot

Regards

Sachin

I am fairly new to Six Sigma and have been assigned to present a report to some executives of an account I handle. I am at a complete lost on what to present. Does anyone have an example of a Six Sigma report? I would like to use it as a guide. It will be held in total confidence. thanks

Any chance of getting a copy of your report? I am also planning to present but I do not have any examples to refer too. Thanks

I would also like to see this  format if you could be so kind.

  tpmg1msn.com

Hi John,

My name is Kevin Potter and I work for a company who has just started a Six Sigma initiative.  We have just completed our project selection and are entering the Define stage.  I got hung up with the Project Charter step.

I thought an example of one of your final reports might grant me a better overall understanding.

Thank you in advance,

Kevin

John,

As a MBB the best format is one that meets the certification guidelines as laid down by your MBB or certifying consultancy.  I.e if a Final Report contains all the elements that the MBB is looking for to certify you then that's great.  You may wish to lay it out in a logical storyboard format so that your presentation is understood by your 6 Sigma Champion and senior Execs alike - afterall you are fixing an issue and getting results.  Certification is just an outcome of undeerstanding & appplying appropriate tools, providing the right leadership and getting the result that will satisfy whom ever requested that you work the issue.

Best Regards,

Adam

e-mail me and I will send you some examples

Mr. Sigma,

Can you post your template here so that people don't have to contact you directly. This is easy to do: http://software.isixsigma.com/forum/attach.asp?messageID=44689

Plus, you didn't provide your email address, so it's impossible to contact you.

Thank you and regards,
Arun

Send me your e-mail and I'll be happy to send you a sample charter with instructions how to complete.

Regards

John

John:I should also appreciate greatly if you send me a copy,thanks in-advance:manabulsiaccessme.com         kind regards,   MMAN

John, it would be appreciated if you could forward me a sample report or the layout you are currently using for submitting these reports.

Thanks again!

email    crowdisclepb.net

Hi John,

Thanks for your response.  Please send it to:

kpottertiltek.com

Thanks again,

Kevin

Dear John,

It is my pleasure if you would share your sample with me as I have no idea in how to do my six sigma report. (levicmamsn.com.hk)

thanks a lot.

Levi Ma

John,

Can you send this sample charter to me? My e-mail id is rajangatouchtelindia.net

Thanks

Rajanga

Would appreciate if you can share thesesamples with me aswell.

Myemail address is anilbakhshirediffmail.com

Dear Mr. John

Please forward me some good Reports in the area of Optimizing Supply Chain Management and Logistics.

Thanks

S N SHARMA

Hi,

Can Somebody send me some of the reports or other relevent stuff for BPO/Inbound Call Center. I have no clue how to go about presenting my project. My future is at stake. Please help. My email is gsethispymac.com

Regards

Gagan

dear mr. john

kindly mail me too some charters please

indreshsairtelindia.com

I am unknown about to make six sigma reports & I am about to present a report on my first Six Sigma Project to the VP of my Company can anyone help me on the best format/ prectices to use .

Thanks.

krr

Dear John,

This is Sudha from India. I am doing a Six Sigma project on recruitment - specifically vendor payments and recoveries. Would like to have a copy of your project report and presentation. Please mail me at krishnan05yahoo.com

Regards

Sudha Krishnan

Hi John,

Can you send me a copy of your final report (amontesph.moog.com). I have been given a rather lenghty format and would like to know of other alternatives.

Cheers!!

alex

Hi

Please send me some sample project reports and examples.

Thanks

Murali

My Mail id: psmuralisymconinc.com

Can I get a copy of Final Report to be used as a guideline my email address is henrybishwashotmail.com.

Thanks

Henry

Hi,

Is it possible to send me some for reference. Thankz!
Email at y_2_kenhotmail.com

KeN

John,

I would appreciate if you could send me a copy of the final report and instructions as per your April 2004 message.

Thanks.

Jena

Greeting John,

Happen to pop by in hope to seek help for my six sigma project. Can I also request a copy of the report format? Thks in advance.

email: ght_tanyahoo.com

Cheers!!!

Please send me  a copy as well,thanks

David,

Can you send me an example of one of your reports? 

So let me know your email,regards

Hi Besie,

Please can u send me ur final report which ur using.....i like to see ur reports. if i get it. i will be happy ..

Thanks

Bhanuprakash

Hi

Please can you send me Exampleof the best final report sample.

I am a black belt engaged in first projects.

Thanks

Hi

Can i please have your final report

I am black belt engaged in first project

Many thanks 

Hi John

Please send me one

I am a black belt engaged in first project(Defects Prevention)

Many Thanks

Hi

Please help,could you send me example of final project report

Many thanks

Hi please help

Hi

Can I please have your final report for the Six Sigma Project

I am black belt engaged in first project

Many thanks 

Hi, John

I am looking for 6 sigma project sample too. Pls email to zwfthomassina.com.cn

thanks

thomas

Hi

I am looking for best sigma final project Report  Please k.maboteventure-sa.co.za

Many Thanks

083 697 1118 Contact

I am in south africa Pretoria

I am a black belt

Haow it comes that you are BB and looking for a project form??

To All,

I work for a private company that has not yet fully adopted the need for Six Sigma methodology.  My department has been pushing upper management for this for some time, and are finally starting to see some interest.  My group will be presenting this methodology and the importance of it to what we do many times in the near future.  What I am looking for is a good SIMPLE presentation template to use to show the DMAIC methodology to other facilities.  If so, could I have a copy of it?  If so, please email to brad.shokesmba.wfu.edu

Thanks

Brad

Brad,

If you spend 30 minutes searching the internet, I used google, you'll find plenty of templates, presentations and examples to use in your report.

Try that.  Good luck.

There is a good one on this forum by the University of Michigan Six Sigma training program.    I use it.   Search for it.

That is what I am doing now, thanks.

I am in the process of setting up a Lean Six Sigma Department. If anyone can provide me with some guidance (Charter, final reports, Reporting responsibilities..etc.) it would be greatly appreciated.

Thanks a million.

Sonnie

email: blaizeccox.net

Did you even read this thread??  Did you search the internet?? 

Hi john I hope is not to late but I'm totally new in six sigma project, could you send me a copy of the formart report, it's very hard for me, becuase i hardly speak english but i try. Please help me.

If anyone has another examples i really appreciate if you can send me anyone

My email is jelizaldeplantabal.com

Thanks

Jorge,

You may want to search Google, search for "six sigma templates", and you will find a template from the University of Michigan, it has some useful ideas that you can cutomize for your specific application.

I hope it helps,

Regards,

Al

Dear John,

I would appreciate it if you could send me as many reports as possible.

Thanks in advance

Micheline

Please could you forward a copy of the final solution

Thanks

Gareth

Please could you forward a copy of the final solution

Thanks

Gareth

Dear John

could you please send me some samples?

mzzhangvip.sina.com

Thanks in advance.

John,

Kindly send some me final report for reference. Many thanks.

YK

Hi John -Please send me the sample format of you report.

Thank you very much in advance!

You are responding to an old posting.  Try a Google Boolean search for a SS final report format/template from the University of Michigan 's SS trining program.   It's a very good report template.   I have used it in the past, but don't have a copy of it at hand.   It also has a Powerpoint template for SS report presentations.

Vinny  

I found the link that I was referring to for the UoM final reports:

http://software.isixsigma.com/offsite.asp?A=Fr&Url=http://www.osat.umich.edu/sixsigma/Reference/templates.htm

Vinny

Sure -what's your mail?

John,

I would appreciate if you could e-mail me a copy.

My e-mail: andaluzalhotmail.com

Best Regards,

Al

Al and Linda, (an earlier in the day poster)

If 'John' hasn't produced for you be sure to check the link Vinny provided at the UoM, on post number 61912. I just reviewed the stuff and it is fine material, and worth having to get started with, or use as is.

In fact, anyone reading this post with a few extra minutes and a floppy disk should review that link and take what interests you.

Vinny, magnifigue!!

hi,

        i am going to present six sigma to my chairman, plearse send me your final report 

I need  a copy  as well.Please kindly  put it in the  forum ,thanks. 

Could u send me the best format for a six sigma report

I really need it

thx b4

best regards

BeerCan

Hi

I would also like a copy of the Best Format for six sigma final report

Thanks

Neil

for anyone who is seeking for final report six sigma,

pls go to : http://www.osat.umich.edu/sixsigma/reference/template.htm

good try,

One of the best presentation templates I have seen is the one on the iSixSigma MAGAZINE, January/February 2005.

I will encourage you to subscribe to the Magazine. It's absolutely great!

Good Luck,

Anna

John, could you please send expamples?

Thanks

John,

Thank you very much for offering some samples of Six Sigma Project report.

I am working in Italy, and would like to see some examples of project reports as done in your country.

Regards,

Gary

email:newmbbyahoo.com

This is probably the longest message thread i have ever seen! i am surprised most people haven't been taught what the story board should look like ( some are certified BB's).

As some one pointed out earlier (last year) the key to an effective presentation is delivery; in terms of understanding what the sponsor/MBB is looking for. As long as you are able to convey what is the current performance (business case),how the current performance affects the process (problem Statement), what you would like to achieve (goal statement, could include monetary benefits), when you are going to get there (milestones for each stage of DMAIC) youi shouldn't be worried about it.

Cheers,

 PS Use power words to make it more effective e.g. reduce, increase, eliminate etc.

 

Hi Ii would like to see some final reports too

l left you mi email: francobchhotmail.com

thanks.

Dear John,

can i see some of your reports? thank you

putianren2002yahoo.com

Z,

Try this link for  Six Sigma report templates:

http://www.osat.umich.edu/sixsigma/Reference/templates.htm

Hi John,

Would be very grateful to you if you could send me also some sample reports.

email ID : yogesh.bhardwajhewitt.com

Regards,

Yogesh

Hai,

Iam robin iam also doing 6 sigma project would help me by sending some model projects for how to make a final report

Regards

Robinson

Can me provide  sample projects on certifivation for Green Belt

I have been trying to contact Larry M Kalmowitz whoused to live in Hamilton, Ohio. Please contact me. 972-991-7569

Yes,I wish to  receive  a  copy too,or  guide  me  to  a special  link (if  possible),thanks.

I would strongly recommend you to read "Package Delivery Optimization", an article published in "isixsigma Magazine" January/February 2005. The article walk you through each step of the DMAIC process. A total of 5 slides is all you need to do for your final report out. I would suggest that you suscribe to this Magazine, it will be $35 well spend.

I hope it helps.

Almudena

Thank You.

Hi, I am Kriss, working on my first project. Pls oblige me by sending the Format for six Sigma Final report. Ii twill be a great help to me.

Regards

Kriss

Kriss, you may find this post useful for a selection of formats, suggested by The Sultan of Salmon, our own Vinny. 

http://software.isixsigma.com/forum/showmessage.asp?messageID=61912

We are ever so happy to oblige, as we are a helpful and considerate forum membership. 

 

Where else can you tag into a four year old series of postings and get immediate response.  

 

If you have any more requests please don’t hesitate to let us know.

 

http://www.osat.umich.edu/sixsigma/Reference/templates.htm

 

Vinny

Phil,

Man you are fast.  As I'm trying to think of a wise guy response and still be helpful you beat me to the punch - on both.   I do like that Sultan of Salmon though.  I'll find a way to work it into my CV.

Vinny

Two operators are waiting for your call. And if you order right now, we'll be happy to send you a trial subscription to Stan's infamous white paper explaining the 1.5 sigma shift, or your choice of a two week stay in Las Vegas or Orlando, Florida. Act right now!!!

Vinny, you are indeed a wise man. Must be all that salmon. Brain food. So wise, in fact that Adam even asked to use one of your quotes, I see.

Do you suppose there is a reason he never asked about using some of my Six Sigma work? Do you suppose I should offer to pay some kind of commission, maybe the highest in the industry, say 15 rupee for each usage to get things started? What do you think?

Phil,

 

I shouldn’t tell this, but you’re obviously in pain and doubting the forum receptiveness of your wise counsel.

 

I routinely look for posters who have posted a personal email address and plead with them to respond to my ramblings positively.   When they say no or hold out for cash I have a special PayPal account that lets me move money into their bank accounts.  

 

It only costs me a few hundred dollars a month but the payback is in copying them and when someone comes into my office and asks if I’m screwing around the Internet again, I tersely wave the copies and say things like, “Screwing around???? …. Screwing around????…. I’m helping Phil and the rest of them keep our field centered!!!  Crap!!! What’s it take to get some respect around here????”   

 

I’ll probably be fired soon but then I know where our speed bumps and potholes are – and even who some of the speed bumps and potholes are, so maybe not.

 

But sorry,….you were in pain and my posting was all about me again.  

 

I will say however, I remember that time you gave some sound advice about Six Sigma analytics and remember thinking, “Crap, he does know his stuff!!!”

 

Hope that helped.

 

Vinny

Vinny,

Thanks again for a measure of your wisdom.

BTW, Daisy Duke say's hello. She remembers you from the early years growing up in Texas.

Excellent advice regarding PayPal. I guess that would beat "I'll be the guy wearing the iSixSigma tee shirt and the dredlocks at the ExxonMobil station out on Route 24, six miles from Totetissville at 6 p.m.Don't do anything stupid." which is how I usually settle up with people.

BTW, that sound advice about Six Sigma analytics came from Overnight Phil, whom I pay premium rates to use the screen name Phil from during he daylight hours. He'll appreciate your observation.

Come to think about it, it has been a while since I answered a post seriously.........Thanks Dr. Vinny, I'm cured.........

Hi Vinny,

So does this mean that I can use the word 'crap' on here again?

T.

Tronan,

 

The word “crap” should only be used in the correct context – as within quotation marks for something said or a thought remembered.   It should never just be used directly within a sentence, that’s rude and shows poor form.  

 

A demonstration of sentences applying the rules for using the word “crap” within a technical forum would be:

 

• Stan said to that little old lady asking whether or not Six Sigma would be a good career move for her grandson, “Crap, old lady… who let you out of the home???”     This is acceptable use by Darth describing a hypothetical Stan posting.

 

• I was thinking to myself, “Gee Phil, should I post this crap or not, and then decided, I can’t let that GiMePro dweeb have the inane space all to himself....”  This is acceptable use by Phil posting a recent pre-posting introspection.

 

• I don’t understand why the moderator lets Vinny’s crap be posted and stay once posted.    This is completely unacceptable use by Tronan as it is directly applied within a sentence without quotation mollification. 

 

Hope that helped.  Some of the forum posting idiosyncrasies go well past anything that you’d have learned in school, but it’s good that you keep asking and learning.

 

Vinny

 

Tronan and Vinny,

I believe you forgot one usage appropriate to our forum, the double-secret differentiated possessive punctuated pronoun.

• In a brief interchange between Ms. Vinny and Vinny, during a  late spring, Sunday afternoon regarding habits, behavior and Six Sigma, "Ya big academic blowhard, you told me you were going to organize the crap in the garage, and don't give me any crap about doing a value stream analysis and flowchart on the project before getting started!!!!!!!!!!!!" This is acceptable when using the proper bold font and two usages of the word and at least 10 exclamation points in ending the statement, assuring proper reader involvement in the dynamics of the near miss of a large frying pan heading in Vinny's direction.

Duck, Vinny.

Phil,

Oh yeah.  I forgot about that one.  Sorry Tronan.

Vinny

Dear Jon,

Can u share your project with me. Actually i m also in the same field, we have already started practicing Lean Six Sigma.

Regds

Prashant

Apology accepted, I was thinking of the same thing as Phil..... honest.

T.

hi,

i am doing a project on six sigma. Would u share the final report as that i can get an idea about it.

Post it to : mannumanyugmail.com

David,

I have been through Black Belt training and need to submit a final project to become certified.  I am looking for a good format for the project to help me get started.

I am an engineer in an investment casting foundry.  We have many processes involved to create our final product.  Please let me know if there is a good format out there to simplify the process.

Thank You!

Dave Robins 1-206-767-5759 Ext. 23

Dave,

Were you able to get the format that you wanted? If yes, would be interested if you can share with me.  If not, I have a one which I use to submit to our company. You may find it helpful.

Best,

Maria Necita

Dave/Maria-

I have what I feel is a pretty good layout for SS project final reports. I have both Microsoft Word and Powerpoint presentations I have enjoyed success with. Please get a hold of me and I would be more than happy to send them to you.

Jeff

jeff.lugbillalexproducts.cc

Maria,

No I did not get a format.  If I do, I will send it to you.  Yes, I would like to see the format you used with your company.  Please e-mail it to me.

Thank You!

Dave Robins

DAve,

Need your email add so I can forward what I use

Maria Necita

Marie,

Please e-mail it to andaluzalhotmail.com.

Thanks

Al

Hi John

I am working on a service quality project. Can you please send me some of the reports samples. I need some for presentation to the process owners, as well as to submit for certification.  

Really appreciate your sharing. My email account is takia06yahoo.com.sg

Thanks alot!

best regards

Takia

Hi David,

I am currently working on couple of projects. I would really appriciate if you can send the one of the sample report to me.

gagan.sethigmail.com

Regards,

Gags

Hi Maria,

I am implementing some Six Sigma solution in my compay. I need to submit a report to my VP. It will be great help if you can provide me some sample six sigma reports.

rgds, Priyank Gupta

I can get u some good reports. please contact me in vsmagesh.kumarge.com

Hi, I am working in a semiconductor company which is on going with 6sigma project,would you pls forward one project example for reference. Thanks a lot,the mail address is :limei_daigaptl.com

Dear ladies and gentlemen,

I'm totally new to the Sigma reporting, but I'm quite fascinated and confused about it's reliability. From what I'm reading, the report should contain the measurable gains, if it is a factory, I suppose it's possible to measure them, providing the whole plant will be changed into a "pilot plant" for the duratation of the report preparation. But how do you go about it in a consulting office where every approach should address individual needs of  a customer?

One more example comes to mind; in the early '80's Lee Iacoca laid off all the engineers at Chrysler, concentrating on rescuing of the corporation, one could have thought that  IT resulted in gains, as no engineers no cost, naturally not for long, but if short goal assumptions are made, driven by the short term profits, the results could be totally illogical.

How long on an average it takes to prepare a full Sigma report, and how acurate are the assumed gains in the reports are vs the reality ?

any and all the answers to these thoughts will be greatly appreciated, kindly please e-mail me at: ckub52yahoo.com

Chris Kubiak

Can you send me a copy of the final Six Sigma report as well as sample templates regarding metric reports? I need to develop a community health metrics report and need to best practices/industry format for the report, if one exists.

Thanks.

Can you please email me sample Six Sigma BB final report to my email bsiv75yah