Connections Between Design for Six Sigma and CMMI

	Bookmark This Page Email This Page Format for Printing Cite This Article Submit an Article Read More Articles
	Related Tools & Articles Connecting Six Sigma to CMMI Measurement and Analysis Combining CMMI®, PSP, TSP, and Six Sigma for Software View via Tollgates in Six Sigma for Software Orientation
	Discussion Forum "There is no connection between Six Sigma and CMMI-5. Six Sigma talks about the end results but CMMI emphasis is in means to achieve it. Six Sigma has nothing to do with process but data. You can use whatever corrective means you apply to get better results...." Contribute to this Discussion

Download Products Design For Six Sigma (DFSS) E-Book or Print Process Management Training Slides Six Sigma Leadership Series

By Gary A. Gack

While there are more than a few connections between the Six Sigma DMAIC roadmap and Capability Maturity Model Integration (CMMI), some practitioners may not be aware of the connections between CMMI and Design for Six Sigma (DFSS). CMMI has four process categories, each contains several process areas that are associated with a maturity level (Table 1). Process areas most strongly connected to DFSS are those in the engineering process category.

DFSS Connections to Engineering Process Areas

Requirements Development (RD) has three goals – (1) to develop customer requirements; (2) to develop product requirements, including characterization of operational concepts and use scenarios (allocating customer requirements to system elements such as hardware, software and people); and (3) to analyze and validate requirements (ensuring that they are necessary and sufficient and that they appropriately balance stakeholder needs and constraints).

The goal of the Requirements Management (REQM) process area is to manage requirements in order to ensure consistency with plans and work products. REQM entails five specific practices, several of which have direct connections to DFSS.

• Understand the requirements.
• Obtain a commitment from those who will implement the requirements.
• Manage changes to the requirements, including change history.
• Provide bi-directional traceability between requirements and related work products.
• Identify inconsistencies between the requirements and project plans and work products.

These practices connect most directly to the Define and Measure phases of the DFSS DMADV roadmap depicted in Figures 1 and 2.

Figure 1: DMADV Roadmap and Toolkit – Define

Step D2 in the DFSS/DMADV roadmap addresses elicitation of customer requirements, including careful distinction of needs specifically identified by the customer, and context data that indicates needs that are easily missed – the "latent" requirements. Context data describes the customer environment and often provides insight that clarifies the "why" behind the requirements and thereby facilitates the understanding required for effective requirements management.

Step D3 focuses attention on the critical-to-quality (CTQ) requirements that drive success – distinguishing them from the routine many. In this step, measures are associated with the CTQs, thereby providing additional insight that facilitates understanding, clarifies ambiguities and establishes the framework necessary for early acceptance testing planning. As test planning will often find as many defects as does testing, the definition of measures at this early stage leads to significant improvements in the quality of the requirements.

Figure 2: DMADV Roadmap and Toolkit – Measure

Step M1 deals with prioritization issues and facilitates balancing of customer needs and constraints in a quantified and reviewable manner that can be revisited whenever changes in requirements occur.

Step M2 includes Y-to-x flowdown, a technique that identifies the lower level factors that must be controlled or optimized in order to satisfy the CTQ requirements. This incorporates one of the central concepts of Six Sigma, Y = f(x) – i.e., Y, an outcome typically not directly controllable, is driven by or is a function of one or more x's, or factors that are controllable and must be carefully addressed.

Step M3 entails planning for and collecting data relevant to measurement success in meeting the requirements of the customer.

Technical Solution (TS) is the third process process area within CMMI's engineering category. This process area has three goals – to select the solution, to develop the design and to implement the design. Selecting the solution aligns most directly with the Analyze phase of the DFSS/DMADV roadmap (Figure 3).

Figure 3: DMADV Roadmap and Toolkit – Analyze

Step A1 uses measures and data to develop a statistically sound understanding of the transfer functions that connect relevant x's to Ys of interest – in other words, determining which factors are the most important and quantifying the strength of the relationships that exist. This approach guides selection of alternative solution concepts or architectures.

Step A2 generates alternative concepts and uses tools such as the concept selection scorecard to guide the evaluation and selection among the feature and architecture alternatives identified. This step produces a product strategy that articulates the concept selected and the feature set to be provided.

Step A3 evaluates alternatives with respect to implementation strategy. This assessment evaluates the business value impact of schedule/cost/quality alternatives. For example, which is best in this situation – fast delivery at a higher cost and lower quality, later delivery date with higher quality and lower cost, or delivering less functionality as a compromise?

Developing and implementing the design align most directly with the DFSS/DMADV Design/Build phase (Figure 4). This is primarily in the realm of traditional software engineering practices, and Six Sigma typically plays a smaller role, often related to optimization of certain aspects of performance.

Verification and Validation are the final two process areas within the engineering category. They align most directly with the Verify phase of the DFSS/DMADV roadmap (Figure 5).

Figure 4: DMADV Roadmap and Toolkit – Design/Build  Figure 5: DMADV Roadmap and Toolkit – Verify

Conclusion: A Synergistic Combination

Six Sigma is being used successfully in conjunction with CMMI in many organizations. Both are powerful in themselves and highly synergistic in combination. 

About the Author: Gary A. Gack is a founding partner of Six Sigma Advantage, based in Rockland, Massachusetts, USA. He has an MBA from the Wharton School, is an ASQ-certified software quality engineer and a Six Sigma Black Belt. During his 40-year career in the software and IT industry, he has managed a variety of large-scale software projects and has consulted with dozens of Fortune 1000 firms. Mr. Gack co-authored Six Sigma Advantage's Black Belt, Green Belt and foundation curriculum. He can be reached at ggack@sixsigma-advantage.com.

BEST SELLING PRODUCTS (iSixSigma Publications) Six Sigma Black Belt (DMAIC) Training Slides - 2009 Version! The 2009 Six Sigma Black Belt course includes over 40 more slides than the 2008 version. Contents include: 1,220 PowerPo... Certified Lean Six Sigma Black Belt Assessment Exam Interested in assessing your knowledge of Lean Six Sigma? Preparing for certifications? Testing your students and traine... Certified Lean Six Sigma Green Belt Assessment Exam This assessment exam is useful for students interested in assessing their knowledge of Lean Six Sigma on the Green Belt ... Kaizen Workshop E-book This 150+ page ebook teaches key tools and techniques of Kaizen, as well as real application to enhance learning. Kaizen... Certified Lean Six Sigma Black Belt E-book In 670 pages learn everything within the Lean Six Sigma DMAIC body of knowledge to successfully achieve Black Belt certi... Process Management Training Slides The 2008 Process Management course is designed in two phases comprised of:352 Powerpoint slidesInstructor notesSlide exp... Design For Six Sigma (DFSS) E-Book or Print Need an "encyclopedia" consisting of many of the tools you’ll study? Need a helpful refresher to apply the DFSS process?... Sell Your Products